How can I use Tom Tom navigator in a Windows 7 installed in an VMware Workstation 10.0.3 in a Linux Centos 7 (kernel 3.10.0-327.36.3.el7.x86_64) host ?
When I connect TomTom usb I have, from Vmware, this message:
The specified device is claimed by another driver (cdc_ether) on the host operating system. The device might be in use. To continue, the device will first be disconnected from its current driver.
How can I disconnect Usb device from its current driver in order to connect it only inside vmware, so that I can use it with windows ?
giving the command: lsusb the response is:
Bus 004 Device 002: ID 1390:5454 TOMTOM B.V. Blue & Me 2
I have put cdc_ether in modprobe blacklist, but without success.
The /var/log/messages reports:
usb 4-4: new high-speed USB device number 2 using ehci-pci
usb 4-4: New USB device found, idVendor=1390, idProduct=5454
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4: Product: TomTom
usb 4-4: Manufacturer: Linux 2.6.28.10 with dwc_otg_pcd
usb 4-4: SerialNumber: BPXXXX
mtp-probe: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:13.2/usb4/4-4"
mtp-probe: bus: 4, device: 2 was not an MTP device
usb 4-4: USB disconnect, device number 52
systemd-udevd: error opening USB device 'descriptors' file
usb 4-4: new high-speed USB device number 53 using ehci-pci
usb 4-4: New USB device found, idVendor=1390, idProduct=5454
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4: Product: TomTom
usb 4-4: Manufacturer: Linux 2.6.28.10 with dwc_otg_pcd
usb 4-4: SerialNumber: BPXXXX
mtp-probe: checking bus 4, device 53: "/sys/devices/pci0000:00/0000:00:13.2/usb4/4-4"
mtp-probe: bus: 4, device: 53 was not an MTP device
systemd-udevd: error opening USB device 'descriptors' file
usb 4-4: USB disconnect, device number 53
usb 4-4: new high-speed USB device number 54 using ehci-pci
usb 4-4: device descriptor read/all, error -71
usb 8-1: new full-speed USB device number 6 using ohci-pci
usb 4-4: new high-speed USB device number 56 using ehci-pci
mtp-probe: bus: 4, device: 56 was not an MTP device
usb 4-4: reset high-speed USB device number 56 using ehci-pci
usb 4-4: reset high-speed USB device number 56 using ehci-pci
systemd-udevd: error opening USB device 'descriptors' file
usb 4-4: USB disconnect, device number 56
usb 4-4: new high-speed USB device number 57 using ehci-pci
device enp3s0 left promiscuous mode
bridge-enp3s0: disabled promiscuous mode